- Beam Clamp - 1648S thru P1653S - Beam Clamp (1-5/8" Series)

P1648S



P1648S 2


Weld is not continuous it is either 11/4" (32) - 13/4" (45) long or 2 spot welds. All welds are on the top and bottom.
For beams under 7/8" (22) thick flange.


Part No. Finish Size Weight
P1651S
GR
1/2"-13
130.00
P1651AS
GR
5/8"-11
130.00
P1650S
GR
3/8"-16
100.00
P1652S
GR
5/8"-11
160.00
P1650AS
GR
1/2"-13
100.00
P1649S
GR
5/16"-18
67.00
P1653S
GR
3/4"-10
160.00
P1648S
GR
1/4"-20
67.00
P1649AS
GR
3/8"-16
67.00
P1651S
EG
1/2"-13
130.00
P1651AS
EG
5/8"-11
130.00
P1652S
EG
5/8"-11
160.00
P1649S
EG
5/16"-18
67.00
P1650S
EG
3/8"-16
100.00
P1649AS
EG
3/8"-16
67.00
P1650AS
EG
1/2"-13
100.00
P1653S
EG
3/4"-10
160.00
P1648S
EG
1/4"-20
67.00
P1652S
HG
5/8"-11
169.60
P1651S
HG
1/2"-13
137.80
P1651AS
HG
5/8"-11
137.80
P1650S
HG
3/8"-16
106.00
P1650AS
HG
1/2"-13
106.00
P1649S
HG
5/16"-18
71.00
P1649AS
HG
3/8"-16
71.00
P1648S
HG
1/4"-20
71.00
P1653S
HG
3/4"-10
169.60
P1651S
SS
1/2"-13
130.00

Notes:

  • When used for mechanical supports, load capacities of brackets and fittings should be in compliance with the American Standard Code for Pressure Piping.

  • Clamps are designed to be used with W, M, S & HP Shape beams, Standard C & Misc. MC Channels, Angles & Structural Tees.

  • Clamps must be used in pairs where indicated.

  • For beam clamps with HG finish, standard hardware is EG finish.

  • For optional stainless steel hardware, please contact the factory for availability.

Additional Specifications